Squeaky Clean, Sticky Feeling during rinse.

[Celestial1124]

Looking for tips on a smooth soft rinse. I made my first batch of soap using a recipe that was recommended on one of the threads. It was a goat milk soap using 40% Lard, 25% Sunflower oil, 20% Coconut oil, 10% Shea Butter and 5% Castor oil. I let the bars cure for 5 weeks and tested one. It was hard and seemed fully cured. It has a really good, creamy bubbly lather. What I'm curious about is when I rinse, I notice a squeaky clean or sticky clean feeling. I don't notice a tight or dry feeling once I'm dry, its just during the rinsing/in the water. I'd love to make a bar with all the conditioning properties that has a smooth rinse. I've bought a goat milk soap that was olive oil, coconut oil and palm oil that rinsed clean that I love. So I'm thinking it might be from the lard or shea butter? Would love anyones insight, thanks!

 

[shunt2011]

What superfat did you use? That’s similar to my recipe and I don’t experience any of that. I generally care my soaps linger though too. 6-8 weeks. Just a personal choice. 20% coconut May also be too much for your skin as everyone is different.

 

[Celestial1124]

Oooh...I did not add any extra oil/fat, just went with the 5% default super fat discount in soap calc....is my soap too lye heavy? I'll post the recipe..

 

[DeeAnna]

Hard water can give that squeaky clean or sticky feeling.

 

[Guspuppy]

My first thought as well is hard water.

 

[dibbles]

Oooh...I did not add any extra oil/fat, just went with the 5% default super fat discount in soap calc....is my soap too lye heavy?

Your soap has a 5% superfat. It isn't lye heavy. You can test your soaps by doing a zap test: How To Properly/Safely Conduct The Zap/Tongue Test

 

[Arimara]

I'd personally use way less water than you did but that recipe is fine.

 

[Celestial1124]

Hard water can give that squeaky clean or sticky feeling.

Thank you, hard water is possible, but other soaps (many handmade) that I've used haven't had this issue with a clean rinse so I was more leaning towards one of the ingredients or something with the recipe.

Thank you, what percent water do you use?

 

[Zany_in_CO]

I'd love to make a bar with all the conditioning properties that has a smooth rinse. I've bought a goat milk soap that was olive oil, coconut oil and palm oil that rinsed clean that I love.

Olive, Coconut & Palm are known as the "Basic Trinity of Oils". I recently made a batch for a customer who could no longer purchase his favorite soap from an online source. It is indeed a lovely soap. I used the default settings to calculate my NaOH amount here :

SoapCalc

Free versatile lye calculator for home soap making

www.soapcalc.net

I used 30 oz. oils which just fit my WSP 1501 Silicone Loaf Mold. See PDF attached.

HTH (Hope This Helps!) and HAPPY SOAPING.

 

[linne1gi]

Olive, Coconut & Palm are known as the "Basic Trinity of Oils". I recently made a batch for a customer who could no longer purchase his favorite soap from an online source. It is indeed a lovely soap. I used the default settings to calculate my NaOH amount here :

SoapCalc

Free versatile lye calculator for home soap making

www.soapcalc.net

I used 30 oz. oils which just fit my WSP 1501 Silicone Loaf Mold. See PDF attached.

HTH (Hope This Helps!) and HAPPY SOAPING.

You used the default setting for water?

 

[Zany_in_CO]

You used the default setting for water?

Yes M'am. Long time soaper here since 2004. I played around with water discounts for a while but found full water works best for most of my soaps. I also cover the batch with 4-ply Mylar while in the mold. I've never had DOS or soda ash.
That may have something to do with Colorado's dry Alpine Desert climate.

 

[linne1gi]

Yes M'am. Long time soaper here since 2004. I played around with water discounts for a while but found full water works best for most of my soaps. I also cover the batch with 4-ply Mylar while in the mold. I've never had DOS or soda ash.
That may have something to do with Colorado's dry Alpine Desert climate.

Wow, I have never ever used the default setting in SoapCalc. I started out at the 33% (water as % of oils) but quickly learned about lye concentrations. And I have been using mostly a 33% lye concentration, although I do use a 45% lye concentration for Castile Soap. I’ve never met a seasoned soaper who uses the default. I’m just surprised.

 

[Celestial1124]

Olive, Coconut & Palm are known as the "Basic Trinity of Oils". I recently made a batch for a customer who could no longer purchase his favorite soap from an online source. It is indeed a lovely soap. I used the default settings to calculate my NaOH amount here :

SoapCalc

Free versatile lye calculator for home soap making

www.soapcalc.net

I used 30 oz. oils which just fit my WSP 1501 Silicone Loaf Mold. See PDF attached.

HTH (Hope This Helps!) and HAPPY SOAPING.

Thank you, I'll try that out on my next batch