stick blender question

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
@Vicki C

First one: Hamilton Beach turbo twister. Met an early death; never had a chance to grow up and I don't miss it.
Second one: Hamilton Beachhttps://www.amazon.com/gp/product/B003NQE8B0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. A horrifically LOUD one!
Third one - and truly the charm! Cuisinart Smart stick version 2018 with the flat bell and the extra holes. The one pictured here. Many of the colored ones have a different bell. https://www.amazon.com/gp/product/B079NXBWDR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1. It's quiet, solidly built, easy button to get the shaft on and off.
I've been using the same model except chrome colored and a wavy bell. I just ordered your model. Such a soapy day!
 
Yesterday, the entire top of my oil mixture was tiny bubbles.
I keep a bottle of isopropyl alcohol handy. Spritz, spritz, spritz. They disappear. 😉
ancient Braun stick blender
I have one of those. I used to use it for soap. Now it's dedicated to lotions and creams. I had a back-up Braun but gave it to Carrie Petersen. In her video at 2.50 she's sad thinking about her Braun dying. LOL

I've had a Cuisinart Smart Stick with a stainless steel shaft ever since 2011 when Carrie introduced us to GLS (Glycerin LS). At that time, the batter got so hot it melted plastic. That's what happened to my very 1st SB that I paid $10 for at Target.
Everyone show us your blender bells!
Cuinsinart Smart Stick with SS Shaft

Smart Stick.jpg
 
Last edited:
use it so little now a days. just got a Cuisinart from wally world. but these look interesting.....
View attachment 62592
About $400 or so. There was a married couple on YouTube that had a fairly big soap business and they used one of these for both CP and LS.
I mean they made LS in like 30 gallon batches!
 
I'm an engineer and a soapmaker and I've made a lot of soap over the past 20+ years. In that time I have seen a number of problems with stick blenders and have found one that works for me (Hamilton Beach 2 Speed Hand Blender #59770). Unfortunately it isn't made any more. It isn't perfect, but does work well enough for production purposes for a few years before needing replacement.
I think I've replaced it every 4 years or so. Problems with it are the shaft and bell are plastic. They have cracked, or a seam has split. The seals around the shaft do wear too quickly, allowing air to be pulled in through the shaft to the bell. But mostly that the on off switch begins to fail and provide only intermittent contact and power to the motor. None of that is surprising because it's not an industrial tool, it's a home use tool. I work it much harder and more often than it was designed to do.
More important are the factors that make it a good tool for me. Mostly it's that even it's high speed setting is low enough powered that air bubbles aren't entrained into the soap. I have purchased and used perhaps 5 different makes and models of stick blender over 23 years, and most don't work well for soapmaking in my opinion. The biggest problem with them is that they have too much power. Too much power translates into too fast blade rotation and cavitation results leaving permanent bubbles in the soap. Every stick blender has the possibility of drawing air down the shaft to the bell. The more powerful the motor and higher the speed, I think the more likely that problem is. Sucking air into the soap also happens if the bell gets too close to the top of the soap in the pot, and the problem is worse with a more powerful motor and higher blade speed.
Overall, I think the most important issue for most soapers is motor power. Lower is better. Metal shaft vs. plastic shaft, shaft bearing quality, bell shape, bell perforations, seals, etc. I think matter less overall, especially if one makes smaller amounts of soap less frequently. I make nearly a ton of soap per year so I make my blender work hard.
 
Well because I frequently make very small batches of soap, about 1.25 pounds, and the stick blender is barely submerged, I decided to drill two 1/4 inch holes on either side of the bell to prevent trapped air. Does this prevent air bubbles, I don't know but it seems to work for me as I have very few if any at all.
 
Back
Top