Quantcast

Rebatch freshly made cold processed soap

SoapMakingForum

Help Support SoapMakingForum:

Joined
Sep 23, 2020
Messages
22
Reaction score
9
Location
India
my recipe was
300 gms coconut oil
300 gms ricebran oil
300 gms sunflower oil
100 gms castor oil
300 gms aloe vera pulp liquidized and strained instead of water
146 gms sodium hydroxide
55gms papaya pulp
2 teasps turmeric powder mixed in oil
zinc oxide
and mogra FO
after pouring in mold and after 2 hours i saw that oil had leaked out on the top of the soap. i would like to know why this happened and now how to rebatch this soap. Thanx
 

lsg

Staff member
Admin
Joined
Oct 14, 2007
Messages
13,767
Reaction score
5,269
A picture would help us to see how much liquid is leaking out. If it is just drops of liquid, then it might be FO sweat. I would wait to see if it is reabsorbed back into the soap.
 

Obsidian

Well-Known Member
Joined
Jun 18, 2013
Messages
9,999
Reaction score
7,407
Location
Idaho, USA
yeah, that needs rebatched. It overheated and separated.

Dump all of it in a crock pot, including the oil you removed. Heat and stir until it comes back together.
It will be thick, like mashed potatoes. Spoon it back into the mold, banging the mold periodically to help prevent large air pockets.

Once its cooled complety, you can unmold and cut.
 
Joined
Sep 23, 2020
Messages
22
Reaction score
9
Location
India
yeah, that needs rebatched. It overheated and separated.

Dump all of it in a crock pot, including the oil you removed. Heat and stir until it comes back together.
It will be thick, like mashed potatoes. Spoon it back into the mold, banging the mold periodically to help prevent large air pockets.

Once its cooled complety, you can unmold and cut.
I donot have a crockpot and my microwave is not working, how else should I cook it again
 

Obsidian

Well-Known Member
Joined
Jun 18, 2013
Messages
9,999
Reaction score
7,407
Location
Idaho, USA
I would try it without water for now but if it seems too dry, add a little at a time, you don't want it runny.
 
Joined
Sep 23, 2020
Messages
22
Reaction score
9
Location
India
I would try it without water for now but if it seems too dry, add a little at a time, you don't want it runny.
Thanx

As I went to unfold the soap yo rebatch I found that it had solidified a bit in the mold, so should I still rebatch it or keep it for a while, maybe in the freezer and see if it maintains it shape or should I just rebatch it.

Waiting for your reply
 

Latest posts

Top