Milk Carton

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stepibarra

Well-Known Member
Joined
May 12, 2008
Messages
179
Reaction score
0
Location
houston
If I use a milk carton as a mold, would I put plastic as a liner or should I just maybe rub baby oil in it? Will it stick?
 
You don't have to rub anything on it. All you do is peel the carton off the soap when the soap's hard enough. :p
 
Same here. It's the cheapest mold I've found but you can only use it once.

Milk cartons are covered with wax or a waxy substance to make them water proof. It also makes them soap proof, almost like having a wax paper lining built in.

I'm saving all milk and juice containers now, for use in test batches. And best of all, you just fill them up to whatever level you like. They're fairly flexible as far as batch size goes, particularly if you keep several on hand for overflow.

The only negative is that the 2-3/4" x 2-3/4" square bars are less than ideal as far as shape and the edges will be rounded and somewhat bowed, negative if you want them straight, or no big deal if you don't care. I taped a metal "L" shaped bracket to the sides to avoid parallelogram distortion in the shape. You can get one at a hardware store for less than a dollar.

A one quart milk carton has a volume of 58 cubic inches and accepts a batch made with 23 ounces of oils. It will produce about 6-8 bars 1" thick. That'll save you the calculations.
 
A one quart milk carton has a volume of 58 cubic inches and accepts a batch made with 23 ounces of oils. It will produce about 6-8 bars 1" thick. That'll save you the calculations.[/quote]

Thanks for saving me all that math..(uggghh) hate it! LOL
 
I are a injunear. I spout numbers at my day job. ;)

Let me point out that you can double the amount of oils and use two milk cartons. That'll give you a batch size of about 3 pounds (46 oz). That's a pretty nice batch size although 1-1/2 pounds is nice too.

Oh a bit of a tip: You might want to have a large funnel handy.
 
Others have been very helpful to me. I can't help them back because they are experts who don't need my help, so I can at least pass it along and help those less experienced soapers. You'll be up and running in no time and I'm sure you'll be helping newbies then. :)

I think you'll progress rapidly because you're so enthusiastic about making batches frequently. You learn something from each batch. Make 12 batches in a month and you'll progress from newbie to intermediate in a month. Make 12 batches in a year and you'll progress from newbie to intermediate in a year.

I think you're dead set on making 12 batches in your first 10 days! :D
 
I think you're dead set on making 12 batches in your first 10 days! :D[/quote]

Think you are right...LOL.... Just finished up with my 3rd batch, before I have to go to work.... Maybe do some CO and crisco when I get home.... Try my hand at a 4# batch... We will see....
 
Go girl go!!! Wheeeee!!!

I hope I'm not making a sexist assumption. :)

Nah, you are correct.... I am a girl...
 
Milk Cartons

That is an excellent tip about the L bracket. I use milk and cream cartons all the time but I don't like that distortion. The funnel sounds useful too especially if the trace is light. I had trouble getting gel from the cartons so I used to just stick them in the fridge and forget about gel. Now I have a nifty little solution to the gel problem. I make a little nest of small towels in a big pot and I set the filled carton in the middle of the nest and cover over the whole thing with a blanket. Works great. Also, I don't like those square bars that you get from the carton, so I cut them in half and this size fits well in my hand . :D
 
Hiya Rita! :) The funnel is useful because it's difficult to pour into the relatively small mouth of the milk carton. I have a ladle but using it would be laborious.

I placed some old towels in a cardboard box I had laying around, then put the milk carton on that in the center of the box, then stuffed in wadded towels around the carton on all sides, and finally covered with another layer of folded towels. I got noticeably exothermic temperature rises and excellent gel using this technique. I've been playing with using a remote reading roast thermometer and digital readout to monitor the gelling of some batches. It's interesting even if not useful.

I have cut milk carton bars in patterns other than the obvious 1" thick slices and gotten somewhat more pleasing form factors. You could for example get 2-3/4" x 9/10" x 3-1/2 (or so) going vertically. I'm sure there are more perhaps better choices. The rounded corners and bowed edges are always a problem unless you trim but then you waste part of the soap.
 
Milk Cartons

I cut the tops off my cartons so that I don't have to deal with the little spouts but this tends to make the distortion of the carton more pronounced...will get some of those L brackets.
 
Yes, I cut the tops off too, but it's still difficult to pour from my soap pot into the carton because the pour width wants to be wider than the mouth of the cut down milk carton. A large funnel neatly solved the problem.
 
Back
Top