Lye concentration/ water discount

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dharlee

Well-Known Member
Joined
Sep 14, 2015
Messages
163
Reaction score
55
Are they basically the same thing? When someone says "I used a 30% lye concentration" are the meaning the water setting in soap calc? I know what that basically means, IF they are the same thing. IF not, I am confused.:crazy:
 
No, they are not the same. Many soapers including myself will soap with a 33% lye concentration which will give you around 27% in the water to oil. Lye concentration is exactly that, "lye concentration". Go to soap calc put in your formula at the default 38% calculate, view print check what the lye concentration come out. Now go back enter in 33% in the lye concentration box, calculate, view/print and check what the percent is for water to oil, in will be somewhere in the mid 20's. DeeAnna has some posts on this
 
If it's any consolation, I was once as confused as you, but the answer is as Carolyn said- no- they are not the same. :)

I think a lot of the confusion stems from there being 2 different ways to calculate one's water amount on SoapCalc. You can either calculate it as a percent of your oils amount ('water as % of oils'), or you can calculate it as a percentage of your lye amount (lye concentration)- both of which are very different methods of calculating water amount that will give you totally different results if you try to use them interchangeably (so don't ever make that mistake).

I personally hate the term 'discounting water'. The only person to whom it has any real meaning is the person actually using the term at any given moment. Since there are 2 different ways of calculating water which lead to different results, I'm always tempted to ask one who says they discounted their water, 'Discounted from what?" lol

I myself prefer to measure my water amount in terms of my lye amount, therefore I prefer to talk in terms of 'lye concentration' when discussing my water amount instead of 'water discount'.


IrishLass :)
 
Mymy -- Definitely it is. I routinely soap anywhere from 30% to 33% lye concentration. I pretty much never go below 30%. I would use as high as 40% lye concentration for a castile (100% olive).

This thread has a good discussion that might be helpful: http://www.soapmakingforum.com/showthread.php?p=555251

ETA -- And I agree 100% with Irish Lass that the "water discount" idea is a bunch o' hooey. It doesn't really mean anything.
 
Last edited:
Thank you so much DeeAnna. Now I am using lye concentration instead of weight of water to oil but for my last batch I used 29% lye concentration. Next time I will up the value. :)
 
Mymy -- Definitely it is. I routinely soap anywhere from 30% to 33% lye concentration. I pretty much never go below 30%. I would use as high as 40% lye concentration for a castile (100% olive).

This thread has a good discussion that might be helpful: http://www.soapmakingforum.com/showthread.php?p=555251

ETA -- And I agree 100% with Irish Lass that the "water discount" idea is a bunch o' hooey. It doesn't really mean anything.
Thank you all. Especially for this post!
 
"...for my last batch I used 29% lye concentration. Next time I will up the value...."

While you're getting used to this and figuring out what works best for you, just change the lye concentration a percent or two at a time. A little change can make a noticeable difference.
 

Latest posts

Back
Top