Lard soap

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BoomerBandit

New Member
Joined
Jun 11, 2019
Messages
2
Reaction score
0
Location
Minnesota
Hey guys,

I was wondering what types of oils you use with Lard? Also what percent of Lard do you use if you do use it. I have never used animal fat in cp soap and was wanting to try. Any info would be great!

Thank you,
 
I HP and have used anywhere from 30-70% lard in my soap over the years. Most people, from what I've seen over the years, tend to use 30-50% lard. You can use it in conjunction with any other oils; the blend depends on what you're seeking in your soap. I'm currently using lard in conjunction with olive, coconut and castor as my base oils.
 
I use this recipe, I am not telling secrets, as I have posted it many times before.

Lard 65%
Coconut Oil 15%
Olive Oil 15%
Castor Oil 5%

Superfat- I used 5-8% before I moved where there is hard water. Now I am loving the 2-3% range better.

Sugar- 1 Tablespoon PPO

Have you had any luck with FO's or colorants?
 
I have made a number of batches with 100% lard...keeping meaning to post some pics/complaints/questions about it. Apparently, it's one of the (relatively) rare mono-oil possibilities.
 
I use 50% lard along with safflower or sunflower, coconut and castor.

No issues with FOs or color. Makes a nice hard, long lasting bar.

I have also made 100% lard. Nice, very gentle soap but it very lacking in lather. A better combo is 80% lard, 20% coconut.
 
...I have also made 100% lard. Nice, very gentle soap but it very lacking in lather. A better combo is 80% lard, 20% coconut.

That's been my experience as well -- an all-lard soap is mild and long lasting, but it doesn't necessarily lather all that well. Add 15% to 20% coconut and the result is really pretty nice, especially after a generous cure time. In my experience, a mostly-lard soap is decent after the usual 4-6 week cure time, but will improve a lot as the months go by.

I normally use a little less lard for most of my batches, because I think a little less stearic and palmitic acid and a little more oleic acid helps the soap to build a nice lather quicker and more easily. My current recipe is similar to Susie's --

Avocado Oil 5.0%
Coconut Oil 15.0%
Sunflower high oleic 20.0%
Lard 60.0%

The avocado is in there for fun and label appeal. If I didn't want to use it, I'd add the avocado's 5% to the sunflower.

One could sub any high oleic oil for the sunflower -- olive, safflower, canola, etc. You'd want to use a high-oleic or mid-oleic version of these oils, not the conventional high-linoleic type.

Another tip to increase the solubility and lathering ability of an all-lard or high-lard soap is to use a "dual lye" mixture. I normally use 5% KOH and 95% NaOH, rather than all NaOH.
 
I use this recipe, I am not telling secrets, as I have posted it many times before.

Lard 65%
Coconut Oil 15%
Olive Oil 15%
Castor Oil 5%

Superfat- I used 5-8% before I moved where there is hard water. Now I am loving the 2-3% range better.

Sugar- 1 Tablespoon PPO
Thank you for this! I have home rendered lard and want to make a mostly lard bar and have been hemming and hawing over a recipe. I will try this! What was the general color of your bar? I am looking to get a white bar but natural color is more important to me than adding TD.
 
I've made 80 % lard and 20 % coconut oil to obtain lovely white bars with good lather and bubbling but a bit drying to my skin. Next time I'm going to reduce CO to 15 or even 10 %.
Often I make CP soap with about 50 % lard (sometimes I have leaf lard which is even whiter) and sunflower, CO and castor oils.
 
I use 30% Lard (the highest percentage of any oil/fat) and then other oils including coconut oil, avocado oil, sunflower oil, and olive oil. I also add in reconstituted goat milk after the hot process cook. I'm in Texas with very hard water and this soap has a lot of great lather and is gentle on the skin.
 
I use 30% Lard (the highest percentage of any oil/fat) and then other oils including coconut oil, avocado oil, sunflower oil, and olive oil. I also add in reconstituted goat milk after the hot process cook. I'm in Texas with very hard water and this soap has a lot of great lather and is gentle on the skin.

Could I ask if you have found 20% coconut oil too drying with that low of lard? I'm still playing with percentages trying to find that sweet spot for my hard water.

Hope
 

Latest posts

Back
Top