Homemade soap cutter

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Toddgray

Member
Joined
Nov 22, 2015
Messages
8
Reaction score
4
Hello all


I just made my first soap cutter. I got all of the parts from Lowes and I will include the part numbers in this post just in case you would like to make one for your self.

The base is 12 inches long by 4 inches wide. The walls are 3 1/2 inches tall . The first set of blocks are 3 inches long . The second set are 8 inches long . The blade is from a floor scraper that Lowes carries you will need to design a wooden handle for the blade I still need to do this and will add once I have figured it out.

1156 1x 6x 12 select pine board
1153 1x4x4 select pine board
588069 14in scraper blade
140307 1 1/4 x 3 1/16 inch angle brackets
52462 brass screws

uploadfromtaptalk1448678769671.jpguploadfromtaptalk1448678783926.jpguploadfromtaptalk1448678795413.jpguploadfromtaptalk1448678806394.jpguploadfromtaptalk1448678830107.jpguploadfromtaptalk1448678841362.jpguploadfromtaptalk1448678866501.jpguploadfromtaptalk1448678878482.jpg
 
Back
Top