Cleaning Up Equipment After Making Soap

Soapmaking Forum

Help Support Soapmaking Forum:

dalewaite48

Well-Known Member
Joined
Dec 18, 2013
Messages
132
Reaction score
216
Location
Grand Rapids, MI
I was wondering what other soap makers found that works the best for them when doing cleanup of their soap making pans and containers. I currently use Dawn dish soap in a tub of very warm water but find it still does not cut the grease and leaves my pans with a greasy film on them. Would love to hear what other people are finding works best for them.
 

Happysoap

Well-Known Member
Joined
Sep 6, 2013
Messages
194
Reaction score
61
I pour hot hot hot water into my pots and pans especially those with active soap batter and lye in them. I leave it for a little while, half hour or so, and then wash with regular dish soap. Clean as a whistle
 
Joined
Dec 22, 2010
Messages
2,010
Reaction score
990
Location
Northwest Florida
Dawn works fine but use more. I use a bunch in my soap pot and stick blend it, then wipe off the SB, a little scrubbie action on the pot and and other tools. Done. Works fine. I use the pot in the sink instead of filling the sink. Some leave it until the next day and just use the soap that is now on the tools.
 

moonbeam

Well-Known Member
Joined
Nov 1, 2007
Messages
102
Reaction score
26
I use the spatula to get as much of the excess as possible, then use those thick paper towels like mechanics use, followed by a soak in Dawn and cool water, then wash. I have even left over night with this method. Worrks very well :)
 
Joined
Jun 18, 2013
Messages
10,844
Reaction score
9,340
Location
Idaho, USA
I let my utensils and bowls sit for a day or two until the batter has turned into soap. Then I soak and wash with dawn dish soap. I don't worry too much if things are a tiny bit oily.
 

Crombie

Well-Known Member
Joined
Jan 27, 2013
Messages
181
Reaction score
95
Location
Shenandoah Valley - Virginia
Washing Soapy Dishes

I soak all my soapying utensils in my soap pot for about ten minutes - nothing else added. I always dump this out in the yard because, even with Dawn, soap is bad for your pipes (my husband used to be a licensed plumber). I use a microfiber cloth to wipe out anything remaining and then run everything in the dishwasher with half the amount of my regular dishwashing detergent. On my dishwasher, I run pots and pans, high temperature wash and SANI rinse (otherwise, over time, you may get your dishwasher gunked up). This has worked for me for the past year with no issues. The microfiber cloth goes in a bucket until I wash my next load of towels. Be careful to use gloves while cleaning up your soapy stuff.
 
Joined
Sep 19, 2011
Messages
12,705
Reaction score
13,424
Location
Southern California
I wipe everything with paper towels to remove as much as possible, then fill my soap bucket with degreaser and a commercial grade detergent to finish washing the utensils, spatulas etc. I then add in a little citric acid to make sure the liquid is neutralized and toss the buckets contents over the bank. I wash all soaping buckets and containers between batches. I just cannot leave messy buckets etc
 
Joined
Aug 1, 2013
Messages
9,904
Reaction score
9,731
Location
Texas
I get every smidge possible into the mold. Then I wipe the tiny bit of residue with a paper towel(it only takes 1). Then lots of water to rinse lye stuff as I go, and into the dishwasher.
 

ca_soap

Well-Known Member
Joined
Oct 26, 2013
Messages
155
Reaction score
113
Location
Southern IL
I used to use paper towels, and still use some in limited numbers. I have a bunch of old dish towels that I wipe all the excess that I can't get with a spatula. Let the towels sit for a couple days then thrown them in laundry, they have more than enough soap already in them nothing else is needed. Saves me quite a bit over using paper towels. I then rinse the items with very hot water and hand wash and at times put them in dishwasher.
 

shunt2011

Moderator Emeritus
Supporting Member
Joined
Apr 2, 2012
Messages
15,448
Reaction score
9,800
Location
Michigan
I too wipe my buckets/pans with paper towel and then fill with hot hot water and some dawn, let it sit for about 10-15 minutes then wash. I do wash everything after each batch as well. I do not put my soaping stuff in my dishwasher as the one time I did my husband said he could taste/smell the frangance on everything.
 

FifthCap

Well-Known Member
Joined
May 20, 2014
Messages
98
Reaction score
17
I put my stuff in the dishwasher, But I also wash everything with a sponge and dishsoap before hand
 

Shalisk

Well-Known Member
Joined
May 4, 2014
Messages
233
Reaction score
161
I bought a plastic tote, that I throw all the dirty stuff into. Then, I put soap over them, toss the tote in the shower, use shower to fill with scalding hot water, let soak 30 minutes, dump water, throw in dish washer. :D
 

Twiggy

Well-Known Member
Joined
Sep 13, 2013
Messages
339
Reaction score
122
Location
Europe
I let my utensils and bowls sit for a day or two until the batter has turned into soap. Then I soak and wash with dawn dish soap. I don't worry too much if things are a tiny bit oily.

I do the same, when I find my pots still to greasy I'll stick them in to the dishwasher and that will do for me :thumbup:
 

Be Love

Well-Known Member
Joined
Dec 27, 2013
Messages
102
Reaction score
75
I have towels and dishcloths dedicated for soap making. When I'm done, I wipe down all my equipment, then let them sit for a day and then wash with liquid dish soap, then rinse in water with a little vinegar in it. I wash the towels once everything that's on them is soap as well. Works well for me!
 
Top