wearytraveler
Well-Known Member
- Joined
- Mar 7, 2016
- Messages
- 233
- Reaction score
- 164
The back is feeling better and I think I'll be up to making the planned batch this weekend. I plan to make round bars in a PVC pipe and wanted to try my hand at an ITPS with two colors but since messing with colors is new to me I'm not sure what method will get me a "nicer" swirl in the finished bars.
My plan is to separate two small portions leaving the main portion uncolored. One portion will be blue and the other white. Now, if you look at my pot at a clock my thoughts were to try the ITPS with one of the following pours:
* All blue at 9 o'clock and all white at 3
* Some blue at 9 AND at 3 then pour white into the blue
* All blue in the center and pour all white into the blue
Each of the above would get the "typical" ITPS spatula mix before pouring into the PVC pipe.
Maybe I'm just overthinking this (I have been known to do that from time to time)? Any suggestions as to which would get my "nicer" swirls?
Thanks!
My plan is to separate two small portions leaving the main portion uncolored. One portion will be blue and the other white. Now, if you look at my pot at a clock my thoughts were to try the ITPS with one of the following pours:
* All blue at 9 o'clock and all white at 3
* Some blue at 9 AND at 3 then pour white into the blue
* All blue in the center and pour all white into the blue
Each of the above would get the "typical" ITPS spatula mix before pouring into the PVC pipe.
Maybe I'm just overthinking this (I have been known to do that from time to time)? Any suggestions as to which would get my "nicer" swirls?
Thanks!