August Soap Challenge Thread

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
inverted stamp challenge entry

Pic 1 swirl tool
Pic 2 before stamping
Pic 3 in mold after stamping
Pic 4 cut bars, tops
Pic 5 cut bars, entire soap

IMAG2438.jpg


IMAG2458.jpg


IMAG2468_1.jpg


IMAG2484.jpg


IMAG2480.jpg
 
I am completely out of time for another try, so this is it. First picture wet soap with tool, second picture set up in mold, third picture cut bars. Unfortunately my wire caused an air bubble at the top curve. I smoothed it out as many times as I dared, but couldn't stop it from happening. Scented with Black Raspberry Vanilla.

BRV wTool Wet.jpg


BRV in Mold.jpg


BRV Bars.jpg
 
Here's mine - only had time for 1 attempt this month

My wire stamps (the butterfly is in 2 halves as I couldn't get the two halves to go together right)
ImageUploadedBySoap Making1440023355.333169.jpg

Just poured (drop followed by hanger in there)
ImageUploadedBySoap Making1440023372.924150.jpg

Wet soap after stamping and a close up
ImageUploadedBySoap Making1440023424.297368.jpg

ImageUploadedBySoap Making1440023447.793127.jpg

Finished soap and close up
ImageUploadedBySoap Making1440023507.536918.jpg

ImageUploadedBySoap Making1440023524.798067.jpg

Can't show cut pics yet as its too soft to cut - dark & pale pink and dark green inside. Scented with cherry blossom.
 
Here we go. This is my standard vegan palm recipe, colored with Nurture Klein Blue with Nurture Shimmer Gold mica highlights nand scented with NG Perfect Man FO.

1st is my mold and stamp. 2nd is after stamping and highlighting. 3rd is just before cut, and 4th is cut and beveled.

1440210140354.jpg


1440210294478.jpg


1440210305237.jpg


1440210314070.jpg
 
Well here goes. The ash really did me in with this one and I can't figure out why my photos are blurry. Unfortunately I don't have time to correct either problem so here's my entry, for what it's worth, lol. I made a gingerbread man out of florist wire and used a toothpick to add his eyes and buttons which you can't see in the pic. It's scented with BB's Gingersnap.

Gingerbread Man 01A.png


Gingerbread Man 02.png
 
Here I am entering one of my all-time ugliest batches... sigh. the FO discolored unexpectedly from white to mauve. My attempt to bring up some color from the base layer to the top, white layer failed miserably. My stamping looks like an accident.

In the mold:
IMG_0194_zpstl0mgplg.jpg


My Tools (please excuse the mess):
IMG_0193_zpstd9oljvk.jpg


The finished , sad soap :(
IMG_0196_zpsk1wlkae3.jpg
 
Didn't get a chance to have another go at it. So, I'll have to go with the first attempt. 1) Tool: shaped wire ying/yang symbols on both ends of a dowel 2) Larger ying/yang symbol 3) Smaller ying/yang symbol 4) Just poured and stamped 5) After one day

full tool.jpg


tool 2.jpg


Tool.jpg


just poured.jpg


Ready to Cut.jpg
 
Grrrr....a lot of "life" has been happening around our house lately and I almost didn't get an entry made for this months challenge.

This is Oatmeal, Milk & Honey, with goats milk, raw ground whole oats, and locally harvested raw honey. My stamp tool is made from soft rubber coated wire, formed into a cluster of hearts. I really like the potential of this technique and will be playing with it some more.

IMG_1639.JPG
 
Back
Top