soap frosting

Soapmaking Forum

Help Support Soapmaking Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sunset

New Member
Joined
Dec 3, 2014
Messages
2
Reaction score
0
Location
Essex Vermont
I am sure this has been asked but can't find an answer.

I see online when people make cupcake frosting, that some people use powdered sugar and other people use MP with liquid hand soap, glycerin?

what happens to the powdered sugar frosting in the tub??

could someone point me a good direction for making frosting that holds it's shape after piping
 
I haven't made frosting myself, but I've used powdered sugar bath bomb cupcakes that other people made. When it gets into the tub, the frosting just dissolves.

I've heard that too much sugar in your water can lead to yeast infections so I didn't use the frosting portion of the bomb cupcakes for my girls when they were little... I didn't do any real investigations on that - just didn't want to chance it.
 
Last edited:
I also found a frosting recipe tutorial on YouTube. There's one that tests 3 different recipes. Best one was foaming bath whip plus M&P plus glycerin. Will try and find link for you. Took me a lot of tutorials to go through to finally find, but it piped beautifully and hardened overnight..
 
I've made cupcake soaps successfully without adding any sugar or whip or anything. I just separate a pound or so of cold process soap and let it cool off for a bit. Don't use a blender for this, you can use a spoon or a spatula but blend it every 10-15 mins or so. Shake the container-- if the soap jiggles only a little bit it might be good enough to create peeks. If it DOES jiggle-- you need to leave it alone for a bit more. Test this by dipping a spoon in the soap and then taking it out. Did the soap leave a peak? shake the container-- did it hold the shape? If so, you are ready to put it in a piping bag and start decorating your soap.

No extra process or steps needed. All you need to make the frosting is patience. I hope this helps
 
I've made cupcake soaps successfully without adding any sugar or whip or anything. I just separate a pound or so of cold process soap and let it cool off for a bit. Don't use a blender for this, you can use a spoon or a spatula but blend it every 10-15 mins or so. Shake the container-- if the soap jiggles only a little bit it might be good enough to create peeks. If it DOES jiggle-- you need to leave it alone for a bit more. Test this by dipping a spoon in the soap and then taking it out. Did the soap leave a peak? shake the container-- did it hold the shape? If so, you are ready to put it in a piping bag and start decorating your soap.

No extra process or steps needed. All you need to make the frosting is patience. I hope this helps

i think the op was asking about frosting with mp. frosting with cp is quite easy, but with mp on its own, not so :D
 
I've made cupcake soaps successfully without adding any sugar or whip or anything. I just separate a pound or so of cold process soap and let it cool off for a bit. Don't use a blender for this, you can use a spoon or a spatula but blend it every 10-15 mins or so. Shake the container-- if the soap jiggles only a little bit it might be good enough to create peeks. If it DOES jiggle-- you need to leave it alone for a bit more. Test this by dipping a spoon in the soap and then taking it out. Did the soap leave a peak? shake the container-- did it hold the shape? If so, you are ready to put it in a piping bag and start decorating your soap.

No extra process or steps needed. All you need to make the frosting is patience. I hope this helps

Please don't ever shake raw soap batter in a container. You could be asking for trouble should the lid fly off and batter flies everywhere. Not worth the risk or necessary.

If making CP frosting you just need to let it sit in the container once you get a good trace and let it thicken up. It takes time but it will get to the consistency you need. I generally just put the soap batter in my piping bag and let it sit until it's ready to pipe.
 
Please don't ever shake raw soap batter in a container. You could be asking for trouble should the lid fly off and batter flies everywhere. Not worth the risk or necessary.

If making CP frosting you just need to let it sit in the container once you get a good trace and let it thicken up. It takes time but it will get to the consistency you need. I generally just put the soap batter in my piping bag and let it sit until it's ready to pipe.

I don't think they meant to actually shake the container so much as to just move it a little bit to test how strong the peaks are and how jiggly the batter is.
 
Back
Top